Low temperature curing laser engraving silver paste ( Model: MGT-LEP-S930 ) is suitable for a new type of capacitive touch screen laser engraving , in a variety of substrates (especially for silver nanowires transparent conductive film, AgNW TCF ) have excellent printing, electrical conductivity, adhesion, and with very good mobility and levelling property, the thickness of the printing can be controlled in 5 to 7um, it can meet the application of 30um thin line laser etching, and it's more suitable for the application of silver nanowires transparent conductive film at low temperature curing.
Product features:
1. Fine Engraving Performance ( line width/Space,L:30μm, S:30μm )
2. Low Temperature Curing ( Circulating Heat /IR Curing , AgNW TCF: 90℃*30min ,
ITO/PET Film:130℃*30min )
3. Excellent Substrate Compatibility(AgNW TCF、PET、ITO、etc….)
4. Excellent Electrical Performance ( Volume Resistance<7.0×10 -5 Ω.cm )
5. Customized product can meet the differentiated applications.
Performance parameters :
Test item | Test tool ( standard ) | MGT-LEP-S930 |
Viscosity | RION VT-04F, no.2 rotor, @ 25℃ | 400±100dPa.s |
Baking conditions & curing temperature |
Oven / IR curing | 90℃*30min(AgNW film) 130℃*30min(ITO film) |
Volume resistivity | Four point probe sheet resistance meter KDY-1 | ≤7×10 -5 Ω.cm |
Adhesion | The lattice test,3M600 tape | 5B |
Surface hardness | Mitsubishi pencil | ≥2H |
High temperature & humidity test | High temperature and high humidity experiment box , 60℃/90%RH/240H | 0.8<R/R 0 <1.2, adhesion ≥ 4B |
Hot and cold impact test | Cold and hot shock experiment box-30℃/30min, 70℃/30min,cycle 20 times | 0.8<R/R 0 <1.2, adhesion ≥ 4B |
Note: above data is our lab test results, may be due to the different test conditions and test environment, there is slightly difference, for reference only. |
Test parameters :
Item | Content | Parameters |
Printing machine ( semi-automatic/automatic screen printing machine ) | Scraper angle | 70~80° |
Scraper hardness | 75~80 | |
Printing screen | Screen mesh | 500 mesh steel mesh / 350-420 mesh polyester mesh |
Sensitive glue thickness | 6~10μm | |
Screen tension | 23~28N | |
Tension screen angle | 22.5 degree | |
Laser engraving | Current ratio | 40~50% |
Frequency | 300~400Hz | |
Engraving speed | 2500~4500mm/s |
Storage and method of use :
1. Sealed storage (10~20 ℃ ), since the date of production is valid for 6 months.
2. For refrigerated product, keep 2-3h back to room temperature , and fully stirring for 10min before printing.
3. Product viscosity has been adjusted, not recommended to use diluter. If it's necessary, please use the well matched one .
URL: www.mogreat.com